Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin

Categories : Samsung

Unlock First, When flash failed Click Here

This flash file stock rom tutorial is used to solve various problems that occur on Samsung Galaxy J5 SM-J510F. As an example if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Samsung Galaxy J5 SM-J510F software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because with this flash will wipe the stored data and replaced with new firmware file. Download Samsung Galaxy J5 SM-J510F firmware on the middle post. Don’t forget to install the Samsung Galaxy J5 SM-J510F driver first before flash. When flash won’t start, you need to unlock the device. Visit link above this article and follow the step how to unlock Samsung Galaxy J5 SM-J510F.

Samsung Galaxy J5 SM J510F Firmware and Flash via Odin

With this Tutorial Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin you can also solve other error problems, such as:

  1. Samsung Galaxy J5 SM-J510F Forgot Password
  2. Samsung Galaxy J5 SM-J510F Forget Pattern
  3. Samsung Galaxy J5 SM-J510F Bootloop
  4. Samsung Galaxy J5 SM-J510F Softbrick
  5. Samsung Galaxy J5 SM-J510F Touch screen is not sensitive
  6. Samsung Galaxy J5 SM-J510F Slow not responsive / Hang
  7. Samsung Galaxy J5 SM-J510F Virus malware
  8. Samsung Galaxy J5 SM-J510F Unfortunately messages has stopped
  9. Samsung Galaxy J5 SM-J510F Unfortunately the app has stopped
  10. Samsung Galaxy J5 SM-J510F often restarts itself
  11. And other errors

Tools

Read Also:

Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin

  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy J5 SM-J510F firmware flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy J5 SM-J510F.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy J5 SM-J510F Flash File via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy J5 SM-J510F.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy J5 SM-J510F Firmware and Flash via Odin

  • After the message appears, Samsung Galaxy J5 SM-J510F will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy J5 SM-J510F, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk