Samsung Galaxy Note 3 SM-N900T Flash File via Odin

Categories : Samsung

There are so many ways to solve the problem on Samsung Galaxy Note 3 SM-N900T, such as bootloop or slow down after installing the application. With this flash file, everything will solved easily. The most important thing to do is to backup data stored in memory Samsung Galaxy Note 3 SM-N900T and replaced with fresh stock rom firmware. Because this flashing process will wipe all the data stored in it. You need to backup data before flash started.

Samsung Galaxy Note 3 SM N900T Flash File via Odin

With this Tutorial “Samsung Galaxy Note 3 SM-N900T Flash File via Odin” you can also solve other error problems, such as:

  1. Samsung Galaxy Note 3 SM-N900T Forgot Password
  2. Samsung Galaxy Note 3 SM-N900T Forget Pattern
  3. Samsung Galaxy Note 3 SM-N900T Bootloop
  4. Samsung Galaxy Note 3 SM-N900T Softbrick
  5. Samsung Galaxy Note 3 SM-N900T Touch screen is not sensitive
  6. Samsung Galaxy Note 3 SM-N900T Slow not responsive / Hang
  7. Samsung Galaxy Note 3 SM-N900T Virus malware
  8. Samsung Galaxy Note 3 SM-N900T Unfortunately messages has stopped
  9. Samsung Galaxy Note 3 SM-N900T Unfortunately the app has stopped
  10. Samsung Galaxy Note 3 SM-N900T often restarts itself
  11. And other errors
Tools

Read Also:

Samsung Galaxy Note 3 SM-N900T Flash File via Odin
  • Use Filter Menu to select your Region (recommend use latest version).
  • Model type is very important, make sure it has chosen correctly before download.
  • After all materials downloaded, move it into one folder.
  • Extract the Samsung Galaxy Note 3 SM-N900T flash file with .zip and you should see the .md5 file.
  • Install  Samsung driver and make sure your device is detected by computer.
  • Open and run Odin.
  • Turn off your Samsung Galaxy Note 3 SM-N900T.
  • Then go to Download Mode, with press caption and hold down “Volume Down + Home + Power” simultaneously, you will see “Warning” message, then you should quickly press Up.

Samsung Galaxy Note 3 SM-N900T Flash File via Odin

  • If it is already in download mode, check on Odin application whether it has been detected or not.
  • When device is connected, check the status in the top left corner, “ID: COM, Added!” (If ID: COM does not appear, then there is a driver that has not been installed correctly).

Samsung Galaxy Note 3 SM-N900T Flash File via Odin

  • Then click the “AP” and locate the .md5 file earlier in the extracted folder. If inside the extracted folder there is a file other than “AP“, please input it according to its original name “BL“, “CP“, “CSC“.

How To Flash Firmware Samsung Galaxy Note 3 SM-N900T via Odin Samsung Galaxy Note 3 SM-N900T Flash File via Odin

  • And make sure the settings should be the same as below (only “Auto Reboot” and “F. Reset Time” are checked).

Samsung Galaxy Note 3 SM-N900T Flash File via Odin

  • If everything is ready, click on “Start” to start flash Samsung Galaxy Note 3 SM-N900T.
  • A successful flash sign will display the message “PASS!” in the upper left of the Odin application.

Samsung Galaxy Note 3 SM-N900T Flash File via Odin

  • After the message appears, Samsung Galaxy Note 3 SM-N900T will reboot system automatically and wait until entering the wizard menu.
  • This boot process will take a little longer than usual, so just wait.
  • NOTE:

If booting more than 10 minutes, you should wipe manual through recovery, turn off your Samsung Galaxy Note 3 SM-N900T, go into recovery by pressing “Up Volume + Home + Power“, then choose wipe menu (cache, data, dalvik cache).

Do With Your Own Risk