Advan T5B Firmware

Unlock First, When flash failed Click Here

How to Flash Advan T5B Firmware via SP Flash Tool? Using this method will overcome Advan T5B which is problematic like bootloop or hang and slow. Because this flash file will replace the damaged system files to fresh again without error. Before flashing in try backup data stored in the internal memory first.

Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware, Advan T5B will feel as fresh as new.

With this Tutorial How to Flash Firmware Advan T5B via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Advan Stuck on Logo
• Forget Pattern
• Advan T5B Bootloop
• Soft Brick
• Advan Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Virus malware
• Unfortunately, the app has stopped
• Advan often restarts itself
• And other errors

Read Also:  How to Flash Advan T5A via SP Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware T5B_P8000_V41_JB_MT6577_V1.26@2013-06-28_16-15.tar stock ROM via Mediafire

Read Also:  Flash Advan T4i

How to Flash Advan T5B Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Advan T5B flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Advan firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the Advan firmware loaded.
7. Uncheck on the Preloader file when you not sure of this ROM for Advan T5B. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash Advan T5B will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Advan T5B firmware is done.

Read Also: Firmware Advan T4A

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When Advan getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK