Huawei Y518-T00 Firmware

Categories : Huawei

Unlock First, When flash failed Click Here

How to Flash Huawei Y518-T00 Firmware via SP Flash Tool? This flash file stock rom tutorial is used to solve various problems that occur on Huawei Y518-T00. As an example, if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Huawei Y518-T00 software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because with this flash will wipe the stored data and replaced with the new firmware file. Get Huawei Y518-T00 firmware on the middle post. Don’t forget to install the Huawei Y518-T00 driver first before flash. When the flash won’t start, you need to unlock the device. Visit the link above this article and follow the step on how to unlock Huawei Y518-T00.

How to Flash Huawei Y518 T00 Firmware via SP Flash Tool

With this Tutorial How to Flash Huawei Y518-T00 Firmware via SP Flash Tool, you can also solve other error problems, such as:

  • Huawei Y518-T00 Forgot Password
  • Huawei Y518-T00 Stuck on Logo
  • Forget Pattern
  • Huawei Y518-T00 Bootloop
  • Soft Brick
  • Huawei Y518-T00 Blank Screen
  • The touch screen is not sensitive
  • Slow not responsive / Hang
  • Huawei Y518-T00 hang on Logo
  • Virus malware
  • Unfortunately, the app has stopped
  • Huawei Y518-T00 often restarts itself
  • And other errors

Tools and Huawei Y518-T00 Firmware Download

  1. MTK USB Driver Google Drive
  2. USB Driver VCOM Google Drive (install when flash won’t running)
  3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
  4. Lenovo Driver (Optional, install when the device can’t detect on PC)
  5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
  6. USB Cable Data
  7. Download stock ROM Huawei_Y518-T00_MT6582.zip Firmware Flash File via Google Drive Mediafire
  8. Password ZIP:

Read Also:  How to Flash Huawei Y520-U22 Firmware via SP Flash Tool

How to Flash Huawei Y518-T00 Firmware via SP Flash Tool

  1. First of all, get all the tools and extract the .zip file.
  2. Extract Huawei Y518-T00 flash file and you will see “MT6582_Android_scatter.txt“.
  3. Install driver.
  4. Install and run the SP Flash Tool application.
  5. Click on Scatter-loading, then open the folder of Huawei Y518-T00 firmware, then click “MT6582_Android_scatter.txt“.How To Flash Huawei Y518-T00 Firmware via SP Flash Tool
  6. Wait until the Huawei Y518-T00 firmware loaded.
  7. Uncheck on Preloader file when you not sure this ROM for Huawei Y518-T00. This will prevent from hard brick.How To Flash Huawei Y518-T00 Firmware via SP Flash Tool
  8. Make sure to select Download Only mode, then click the Download button.How To Flash Huawei Y518-T00 Firmware via SP Flash Tool
  9. Now Turn off your Huawei Y518-T00 and remove the battery (for non-removable battery, just need to turn off the device).
  10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
  11. Flash Huawei Y518-T00 will run automatically.
  12. Wait until flashing finish with a green sign.How To Flash Huawei Y518-T00 Firmware via SP Flash Tool
  13. Unplug the cable and turn on your device.
  14. First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
  15. Flash Huawei Y518-T00 firmware done.

Read Also: Flash Huawei Y600-U00 Firmware via Flashtool

NOTE:

  • When the device can’t detect on PC, try to reinstall the driver (optional drivers).
  • When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
  • When Huawei Y518-T00 getting bootloop after flash, try to hard reset via recovery.

How To Flash Huawei Y518-T00 Firmware via SP Flash Tool

DO WITH YOUR OWN RISK