Huawei Y520-U22 Firmware
Unlock First, When flash failed Click Here
How to Flash Huawei Y520-U22 Firmware via SP Flash Tool? To solve or fix the Huawei Y520-U22 android problem like bootloop or hang, forget the pattern, you can try this Huawei Y520-U22 firmware as a solution. Because in this way will replace the file system Huawei Y520-U22 problem with fresh or new. Just remember before the flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost.
Because this flash will wipe the entire contents of data stored in the internal memory. With this stock rom Huawei Y520-U22 firmware will feel as fresh as new.
With this Tutorial How to Flash Huawei Y520-U22 Firmware via SP Flash Tool, you can also solve other error problems, such as:
- Huawei Y520-U22 Forgot Password
- Huawei Y520-U22 Stuck on Logo
- Forget Pattern
- Huawei Y520-U22 Bootloop
- Soft Brick
- Huawei Y520-U22 Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Huawei Y520-U22 hang on Logo
- Virus malware
- Unfortunately, the app has stopped
- Huawei Y520-U22 often restarts itself
- And other errors
Tools and Huawei Y520-U22 Firmware Download
- MTK USB Driver Google Drive
- USB Driver VCOM Google Drive (install when flash won’t running)
- CDC Driver Installer (Optional, install when the device can’t detect on PC)
- Lenovo Driver (Optional, install when the device can’t detect on PC)
- SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
- USB Cable Data
- Download stock ROM Huawei_Y520-U22_MT6582.zip Firmware Flash File via Google Drive Mediafire
- Password ZIP:
How to Flash Huawei Y520-U22 Firmware via SP Flash Tool
- First of all, get all the tools and extract the .zip file.
- Extract Huawei Y520-U22 flash file and you will see “MT6582_Android_scatter.txt“.
- Install driver.
- Install and run the SP Flash Tool application.
- Click on Scatter-loading, then open the folder of Huawei Y520-U22 firmware, then click “MT6582_Android_scatter.txt“.
- Wait until the Huawei Y520-U22 firmware loaded.
- Uncheck on Preloader file when you not sure this ROM for Huawei Y520-U22. This will prevent from hard brick.
- Make sure to select Download Only mode, then click the Download button.
- Now Turn off your Huawei Y520-U22 and remove the battery (for non-removable battery, just need to turn off the device).
- Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
- Flash Huawei Y520-U22 will run automatically.
- Wait until flashing finish with a green sign.
- Unplug the cable and turn on your device.
- First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
- Flash Huawei Y520-U22 firmware done.
Read Also: Flash Huawei Y618-T00 Firmware via Flashtool
- When the device can’t detect on PC, try to reinstall the driver (optional drivers).
- When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
- When Huawei Y520-U22 getting bootloop after flash, try to hard reset via recovery.
DO WITH YOUR OWN RISK
- How flesh y520 with sp tool
- how to flash hauwei y520
- how to flash huawei phone 520
- how to flash huawei y520u22 on flash tool
- huawei 520
- huawei y520 u22 firmware fix errors
- huawei y520 u22 flash file sp flash tool