Meizu M92 Firmware
Unlock First, When flash failed Click Here
How to Flash Meizu M92 Firmware via SP Flash Tool (Meizu Blue Charm X)? Flash is one way to tackle android the bootloop. For example, in Meizu M92 that the problem occurs or malware virus, you can try this flash file stock ROM as a solution to resolve it. You can download the Meizu M92 firmware file via google drive from the link below. Keep in mind for this flashing, data stored in the internal memory will be lost erased. So try to backup data before flashing Meizu.
With this Tutorial How to Flash Firmware Meizu M92 via SP Flash Tool, you can also solve other error problems, such as:
- Forgot Password
- Meizu M92 Stuck on Logo
- Forget Pattern
- Soft Brick
- Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Virus malware
- Unfortunately, the app has stopped
- Meizu often restarts itself
- And other errors
Tools and Firmware Download
- MTK USB Driver
- USB Driver VCOM (install when flash won’t running)
- CDC Driver Installer (Optional, install when the device can’t detect on PC)
- Lenovo Driver (Optional, install when the device can’t detect on PC)
- SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
- USB Cable Data
- Download firmware Meizu_Blue_Charm_X_M92_MT6757_15122016.zip stock ROM via Google Drive
Read Also: Flash Meizu E3
How to Flash Meizu M92 Firmware via SP Flash Tool
- First of all, get all the tools and extract the .zip file.
- Extract the Meizu M92 flash file and you will see “MTxxxx_Android_scatter.txt“.
- Install USB driver.
- Install and run the SP Flash Tool application.
- Click on Scatter-loading, then open the folder of Meizu M92 firmware, then click “MTxxxx_Android_scatter.txt“.
- Wait until the firmware loaded.
- Uncheck on the Preloader file when you not sure of this ROM for Meizu. This will prevent hard brick, this is optional.
- Make sure to select Download Only mode, then click the Download button.
- Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
- Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
- Flash will run automatically.
- Wait until flashing finishes with a green sign.
- Unplug the cable and turn on your device.
- The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
- Flash Meizu M92 firmware is done.
Read Also: Firmware Meizu C9
- When the device can’t detect on PC, try to reinstall the driver (optional drivers).
- When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
- When getting bootloop after flash, try to hard reset via recovery.