Evercoss B75A Winner Y3 Firmware

Categories : Evercoss

Unlock First, When flash failed Click Here

How to Flash Evercoss B75A Winner Y3 Firmware via SP Flash Tool (Scatter Flash File)? Using this method will overcome Evercoss B75A which is problematic like bootloop or hang and slow. Because this flash file will replace the damaged system files to fresh again without error. Before flashing in try backup data stored in the internal memory first.

Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware, Evercoss B75A Winner Y3 will feel as fresh as new.

How to Flash Evercoss B75A Winner Y3 Firmware via SP Flash Tool (Scatter Flash File)

With this Tutorial How to Flash Firmware Evercoss B75A Winner Y3 via SP Flash Tool, you can also solve other error problems, such as:

  • Forgot Password
  • Evercoss Winner Y3 Stuck on Logo
  • Forget Pattern
  • Bootloop
  • Soft Brick
  • Blank Screen
  • The touch screen is not sensitive
  • Slow not responsive / Hang
  • Virus malware
  • Unfortunately, the app has stopped
  • Evercoss often restarts itself
  • And other errors

Read Also:  How to Flash Oppo R11 CPH1707 Firmware via DownloadTool

Tools and Firmware Download

  1. MTK USB Driver
  2. USB Driver VCOM (install when flash won’t running)
  3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
  4. Lenovo Driver (Optional, install when the device can’t detect on PC)
  5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file does not load. Download SP Flash Tool 3)
  6. USB Cable Data
  7. Download firmware B75A_EVERCOSS Winner Y3_V05_6_0_MARSHMALLOW_MT6735.zip stock ROM via Google Drive
  8. Password ZIP:  
  9. If you get Limit Google Drive, you need to login to your Gmail account or follow this tutorial Bypass Google Drive Download Limit (Quota Exceeded) Error

Read Also:  Flash Oppo Reno 10X Zoom CPH1919

How to Flash Evercoss B75A Winner Y3 Firmware via SP Flash Tool

  1. First of all, get all the tools and extract the .zip file.
  2. Extract the Evercoss B75A flash file and you will see “MTxxxx_Android_scatter.txt“.
  3. Install USB driver.
  4. Install and run the SP Flash Tool application.
  5. Click on Scatter-loading, then open the folder of Evercoss firmware, then click “MTxxxx_Android_scatter.txt“.Scatter Evercoss B75A Winner Y3 Firmware
  6. Wait until the firmware is loaded.
  7. Uncheck on the Preloader file when you are not sure of this ROM for Evercoss Winner Y3. This will prevent hard brick, this is optional.Remove Preloader SP Flash Tool
  8. Make sure to select Download Only mode, then click the Download button.Start Flashing Evercoss B75A Winner Y3
  9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
  10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
  11. Flash will run automatically.
  12. Wait until flashing finishes with a green sign.Flash Succcessful
  13. Unplug the cable and turn on your device.
  14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
  15. Flash Evercoss B75A firmware is done.

Read Also: Download Oppo R17 PBET00 Flash File

NOTE:

  • When the device can’t detect on PC, try to reinstall the driver (optional drivers).
  • When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
  • When getting bootloop after flash, try to hard reset via recovery.

Firmware Upgrade Evercoss B75A Winner Y3

DO WITH YOUR OWN RISK