Lenovo K8 Note XT1902-3 Firmware
Unlock First, When flash failed Click Here
How to Flash Lenovo K8 Note XT1902-3 Firmware via SP Flash Tool? The easiest way to tackle the Lenovo K8 Note XT1902-3 bootloop is with this flash file. Because this Lenovo K8 Note XT1902-3 flash file will replace the damaged system files cause bootloop with fresh new Lenovo XT1902-3 flash file. By using Lenovo K8 Note XT1902-3 firmware stock rom will be like new. Keep in mind before flashing, the data stored in the internal memory will be wipe and lost. So please backup first important data to external memory or directly to PC for safe.
With this Tutorial How to Flash Lenovo K8 Note XT1902-3 Firmware via SP Flash Tool, you can also solve other error problems, such as:
- Lenovo K8 Note XT1902-3 Forgot Password
- Lenovo K8 Note Stuck on Logo
- Forget Pattern
- Lenovo XT1902-3 Bootloop
- Soft Brick
- Lenovo K8 Note XT1902-3 Blank Screen
- The touch screen is not sensitive
- Slow not responsive / Hang
- Lenovo XT1902-3 hang on Logo
- Virus malware
- Unfortunately, the app has stopped
- Lenovo K8 Note XT1902-3 often restarts itself
- And other errors
Tools and Lenovo K8 Note XT1902-3 Firmware Download
- MTK USB Driver Google Drive
- USB Driver VCOM Google Drive (install when flash won’t running)
- CDC Driver Installer (Optional, install when the device can’t detect on PC)
- Lenovo Driver (Optional, install when the device can’t detect on PC)
- SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
- USB Cable Data
- Download stock ROM Lenovo K8 Note XT1902-3 MT6797_26092017_7.1.1.zip Firmware Flash File via Google Drive Mediafire
- Password ZIP:
Read Also: How to Flash Lenovo A536 ROM Firmware via SP Flash Tool
How to Flash Lenovo K8 Note XT1902-3 Firmware via SP Flash Tool
- First of all, get all the tools and extract the .zip file.
- Extract Lenovo K8 Note XT1902-3 flash file and you will see “MT6797_Android_scatter.txt“.
- Install driver.
- Install and run the SP Flash Tool application.
- Click on Scatter-loading, then open the folder of Lenovo XT1902-3 firmware, then click “MT6797_Android_scatter.txt“.
- Wait until the Lenovo XT1902-3 firmware loaded.
- Uncheck on Preloader file when you not sure this ROM for Lenovo K8 Note XT1902-3. This will prevent from hard brick.
- Make sure to select Download Only mode, then click the Download button.
- Now Turn off your Lenovo K8 Note XT1902-3 and remove the battery (for non-removable battery, just need to turn off the device).
- Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
- Flash Lenovo K8 Note XT1902-3 will run automatically.
- Wait until flashing finish with a green sign.
- Unplug the cable and turn on your device.
- First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
- Flash Lenovo XT1902-3 firmware done.
Read Also: How to Flash Lenovo A2010A Firmware via Flashtool
NOTE:
- When the device can’t detect on PC, try to reinstall the driver (optional drivers).
- When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
- When Lenovo K8 Note XT1902-3 getting bootloop after flash, try to hard reset via recovery.