Lenovo TB3-710F Firmware

Unlock First, When flash failed Click Here

How to Flash Lenovo TB3-710F Firmware via SP Flash Tool? Flash is a way to overcome various problems that occur on Lenovo TB3-710F. Because by this Lenovo TB3-710F flash file, which error like bootloop or malware virus can be overcome and return to normal without any constraints. Flashing is very useful to restore your troubled android. Because of how this flash will replace the Lenovo TB3-710F firmware problem with fresh stock rom without error.

With this Tutorial How to Flash Lenovo TB3-710F Firmware via SP Flash Tool, you can also solve other error problems, such as:

• Lenovo TB3-710F Forgot Password
• Lenovo TB3-710F Stuck on Logo
• Forget Pattern
• Lenovo TB3-710F Bootloop
• Soft Brick
• Lenovo TB3-710F Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Lenovo TB3-710F hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• Lenovo TB3-710F often restarts itself
• And other errors

Tools and Lenovo TB3-710F Firmware Download

1. MTK USB Driver Google Drive
2. USB Driver VCOM Google Drive (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download stock ROM Lenovo TB3-710F MT8127_S000024_160506_5.0.1.zip Firmware Flash File via Google Drive Mediafire
8. Password ZIP:

Read Also:  Lenovo A5860 Firmware via SP Flash Tool

How to Flash Lenovo TB3-710F Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract ROM Lenovo TB3-710F flash file and you will see “MT8127_Android_scatter.txt“.
3. Install driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Lenovo TB3-710F firmware, then click “MT8127_Android_scatter.txt“.
6. Wait until the Lenovo TB3-710F firmware loaded.
7. Uncheck on Preloader file when you not sure this ROM for Lenovo TB3-710F. This will prevent from hard brick.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your Lenovo TB3-710F and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
11. Flash Lenovo TB3-710F will run automatically.
12. Wait until flashing finish with a green sign.
13. Unplug the cable and turn on your device.
14. First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Lenovo TB3-710F firmware done.

Read Also: How to Flahs Lenovo S720i Firmware via Flashtool

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When Lenovo TB3-710F getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK