MyPhone Agua RIO Lite Firmware

Unlock First, When flash failed Click Here

How to Flash MyPhone Agua RIO Lite Firmware via SP Flash ToolAlmost every android would be a problem like bootloop, hang, and slow response. And for example it happened on your MyPhone Agua RIO Lite, you can try to flash with this file rom, to solve the problem. With a flawed MyPhone Agua RIO Lite flash will come back to fresh and normal again. Because the firmware that has been replaced with MyPhone Agua RIO Lite flash file stock ROM fresh without error. All you need to know is to backup the data in internal memory. Because this flash will wipe all data in the memory. Download MyPhone Agua RIO Lite firmware on the link below, make sure your device is same with this firmware version.

With this Tutorial How to Flash MyPhone Agua RIO Lite Firmware via SP Flash Tool, you can also solve other error problems, such as:

• MyPhone Agua RIO Lite Forgot Password
• MyPhone Agua RIO Lite Stuck on Logo
• Forget Pattern
• MyPhone Agua RIO Lite Bootloop
• Soft Brick
• MyPhone Agua RIO Lite Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• MyPhone Agua RIO Lite hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• MyPhone Agua RIO Lite often restarts itself
• And other errors

Tools and MyPhone Agua RIO Lite Firmware Download

1. MTK USB Driver Google Drive
2. USB Driver VCOM Google Drive (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download stock ROM MyPhone_Agua_RIO_Lite_MT6582.zip Firmware Flash File via Google Drive Mediafire
8. Password ZIP:

Read Also:  MyPhone MyT5 DTV Firmware via SP Flash Tool

How to Flash MyPhone Agua RIO Lite Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract MyPhone Agua RIO Lite flash file and you will see “MT6582_Android_scatter.txt“.
3. Install driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of MyPhone Agua RIO Lite firmware, then click “MT6582_Android_scatter.txt“.
6. Wait until the MyPhone Agua RIO Lite stock ROM firmware loaded.
7. Uncheck on Preloader file when you not sure this ROM for MyPhone Agua RIO Lite. This will prevent from hard brick.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your MyPhone Agua RIO Lite and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
11. Flash MyPhone Agua RIO Lite will run automatically.
12. Wait until flashing finish with a green sign.
13. Unplug the cable and turn on your device.
14. First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash MyPhone Agua RIO Lite firmware done.

Read Also: MyPhone My807 Firmware via Flashtool

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When MyPhone Agua RIO Lite getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK