MyPhone MyT5 DTV Firmware

Unlock First, When flash failed Click Here

How to Flash MyPhone MyT5 DTV Firmware via SP Flash Tool? The best way to cope with android problems such as bootloop or hang because of the virus. You can try with MyPhone MyT5 DTV flash file. If that happens on your MyPhone MyT5 DTV, you can try this flash. This will wipe all data in internal memory. Because it will replace with fresh MyPhone MyT5 DTV firmware stock rom without any problems. So before flashing on this MyPhone MyT5 DTV, backup important data first to the PC or internal memory.

With this Tutorial How to Flash MyPhone MyT5 DTV Firmware via SP Flash Tool, you can also solve other error problems, such as:

• MyPhone MyT5 DTV Forgot Password
• MyPhone MyT5 DTV Stuck on Logo
• Forget Pattern
• MyPhone MyT5 DTV Bootloop
• Soft Brick
• MyPhone MyT5 DTV Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• MyPhone MyT5 DTV hang on Logo
• Virus malware
• Unfortunately, the app has stopped
• MyPhone MyT5 DTV often restarts itself
• And other errors

Tools and MyPhone MyT5 DTV Firmware Download

1. MTK USB Driver Google Drive
2. USB Driver VCOM Google Drive (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download stock ROM MyPhone_MyT5_DTV_MT6580_11072017_7.0.zip Firmware Flash File via Google Drive Mediafire
8. Password ZIP:

Read Also:  MyPhone My807 Firmware via SP Flash Tool

How to Flash MyPhone MyT5 DTV Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract MyPhone MyT5 DTV flash file and you will see “MT6580_Android_scatter.txt“.
3. Install driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of MyPhone MyT5 DTV firmware, then click “MT6580_Android_scatter.txt“.
6. Wait until the MyPhone MyT5 DTV firmware loaded.
7. Uncheck on Preloader file when you not sure this ROM for MyPhone MyT5 DTV. This will prevent from hard brick.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your MyPhone MyT5 DTV and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
11. Flash MyPhone MyT5 DTV will run automatically.
12. Wait until flashing finish with a green sign.
13. Unplug the cable and turn on your device.
14. First booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash MyPhone MyT5 DTV firmware done.

Read Also: Huawei P8 Firmware via Flashtool

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When MyPhone MyT5 DTV getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK