Oppo Joy Plus R1011 Firmware

Unlock First, When flash failed Click Here

How to Flash Oppo Joy Plus R1011 Firmware via SP Flash Tool (Scatter File)? Flash is a way to overcome various problems that occur on Oppo Joy Plus R1011. Because by this flash file Oppo, which error like bootloop or malware virus can be overcome and return to normal without any constraints. Flashing is very useful to restore your troubled android. Because of how this flash will replace the Oppo R1011 firmware problem with fresh stock rom without error.

With this Tutorial How to Flash Firmware Oppo Joy Plus R1011 via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Oppo R1011 Stuck on Logo
• Forget Pattern
• Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Virus malware
• Unfortunately, the app has stopped
• Oppo often restarts itself
• And other errors

Read Also:  How to Flash Oppo R2001 Firmware via SP Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. SP Flash Tool V5 (Use SP Flash Tool V3, if the scatter file does not load)
5. USB Cable Data
6. Download Oppo Joy Plus R1011 firmware
7. If you get Limit Google Drive, you need to login to your Gmail account or follow this tutorial Bypass Google Drive Download Limit (Quota Exceeded) Error

Read Also:  Flash Oppo R8113 Firmware

How to Flash Oppo Joy Plus R1011 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Oppo flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Oppo R1011 firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the firmware is loaded.
7. Uncheck on the Preloader file when you are not sure of this ROM for Oppo R1011. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Oppo Joy Plus R1011 firmware is done.

Read Also: Download Oppo R2010 Flash File

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK