Acer Liquid Z500 Firmware

Unlock First, When flash failed Click Here

How to Flash Acer Liquid Z500 Firmware via SP Flash Tool? To solve or fix the Acer Z500 android problem like bootloop or hang, forget the pattern, you can try this flash file as a solution. Because in this way will replace the file system Acer Liquid Z500 problem with fresh or new. Just remember before flashing is backup important in the internal memory. Because after flash finished, the data will be wipe and lost.

Because this flash will wipe the entire contents of data stored in the internal memory. With this stock ROM firmware, Acer Z500 will feel as fresh as new.

With this Tutorial How to Flash Firmware Acer Liquid Z500 via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Acer Z500 Stuck on Logo
• Forget Pattern
• Bootloop
• Soft Brick
• Acer Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Stuck on Logo
• Virus malware
• Unfortunately, the app has stopped
• Acer Liquid Z500 often restarts itself
• And other errors

Read Also:  How to Flash Acer Liquid Z410 Firmware via SP Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware Acer_Liquid_Z500_MT6582_1112014_4.4.2.zip stock ROM via Google Drive / Android File Host

Read Also:  Flash Advan S40 LTE

How to Flash Acer Liquid Z500 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Acer Liquid Z500 flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Acer Liquid Z500 firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the Acer Z500 firmware loaded.
7. Uncheck on the Preloader file when you not sure of this ROM for Acer Liquid Z500. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your Acerand remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect and repeat the steps above).
11. Flash Acer Z500 will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Acer Liquid Z500 firmware is done.

Read Also: Firmware Advan S4J

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When Acer Liquid Z500 getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK