Acer Liquid Z630 Firmware

Unlock First, When flash failed Click Here

How to Flash Acer Liquid Z630 Firmware via SP Flash Tool? This flash file stock ROM tutorial is used to solve various problems that occur on Acer Z630. As an example, if there is bootloop or hang because of the virus, you can try this flashing way to overcome the bootloop and other problems on Acer software. The important thing to remember for this tutorial is to backup data stored in internal memory. Because this flash will wipe the stored data and replaced it with the new firmware file. Get Acer Liquid Z630 firmware on the middle post. Don’t forget to install the MTK USB driver first before the flash.

With this Tutorial How to Flash Firmware Acer Liquid Z630 via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Acer Liquid Z630 Stuck on Logo
• Forget Pattern
• Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Virus malware
• Unfortunately, the app has stopped
• Acer Liquid often restarts itself
• And other errors

Read Also:  How to Flash Acer Liquid Zest Plus Firmware via Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware Acer_Liquid_Z630_MT6735_AV0L0_T03_1.020.00_EMEA_GEN1 stock ROM via Mediafire

Read Also:  Flash Advan T5C

How to Flash Acer Liquid Z630 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Acer Liquid Z630 flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Acer firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the Acer Liquid Z630 firmware loaded.
7. Uncheck on the Preloader file when you not sure of this ROM for Acer Liquid Z630. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your Acer device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Acer Liquid Z630 firmware is done.

Read Also: Firmware Advan T5B

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When Acer getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK