Acer Iconia A3-A10 Firmware

Unlock First, When flash failed Click Here

How to Flash Acer Iconia A3-A10 Firmware via SP Flash Tool? Flash is one way to solve problems on android. If the Acer Iconia A3-A10 bootloop because of the malware virus, you can try this flash file to solve the problem. This will replace the system that is corrupted with fresh Acer Iconia firmware flash file stock ROM. But the data stored in internal memory will also wipe after flashing. So do backups before flashing Acer Iconia A3-A10. Before downloading this firmware, make sure your device is the same as this Acer firmware.

With this Tutorial How to Flash Firmware Acer Iconia A3-A10 via SP Flash Tool, you can also solve other error problems, such as:

• Forgot Password
• Stuck on Logo
• Forget Pattern
• Acer Iconia A3-A10 Bootloop
• Soft Brick
• Blank Screen
• The touch screen is not sensitive
• Slow not responsive / Hang
• Acer Iconia
• Virus malware
• Unfortunately, the app has stopped
• Aceroften restarts itself
• And other errors

Read Also:  How to Flash Advan T1Z via SD Card and SP Flash Tool

Tools and Firmware Download

1. MTK USB Driver
2. USB Driver VCOM (install when flash won’t running)
3. CDC Driver Installer (Optional, install when the device can’t detect on PC)
4. Lenovo Driver (Optional, install when the device can’t detect on PC)
5. SP Flash Tool V5 Google Drive (Use SP Flash Tool V3, if the scatter file not load. Download SP Flash Tool 3)
6. USB Cable Data
7. Download firmware Acer_Iconia_A3-A10_MT6589_03092014_4.2.zip stock ROM via Google Drive / Mirror

Read Also:  Flash Advan T1X New

How to Flash Acer Iconia A3-A10 Firmware via SP Flash Tool

1. First of all, get all the tools and extract the .zip file.
2. Extract the Acer Iconia A3-A10 flash file and you will see “MTxxxx_Android_scatter.txt“.
3. Install USB driver.
4. Install and run the SP Flash Tool application.
5. Click on Scatter-loading, then open the folder of Acer Iconia firmware, then click “MTxxxx_Android_scatter.txt“.
6. Wait until the Acer firmware loaded.
7. Uncheck on the Preloader file when you not sure of this ROM for Acer Iconia. This will prevent hard brick, this is optional.
8. Make sure to select Download Only mode, then click the Download button.
9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
11. Flash Acer will run automatically.
12. Wait until flashing finishes with a green sign.
13. Unplug the cable and turn on your device.
14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
15. Flash Acer Iconia A3-A10 firmware is done.

Read Also: Firmware Asus X009DA via SD Card

NOTE:

• When the device can’t detect on PC, try to reinstall the driver (optional drivers).
• When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
• When Acer Iconia getting bootloop after flash, try to hard reset via recovery.

DO WITH YOUR OWN RISK